If you follow 3D printing at all, chances are you’ve at least heard about 3D printing pens like the 3Doodler and others, with the 3Doodler originally funded through Kickstarter and now a successful brand. While I’ve seen people make some really interesting things like the Eiffel Tower and Golden Gate Bridge, I have to admit the pens have never really interested me. I can see the fun for kids because they are so easy to pick up and begin using, much like a hot glue gun, and there are templates you literally trace over to construct your object. However the models are really only visual, it would be almost impossible to make anything accurate or functional in the same way you can with an actual 3D printer.
However I was given a 3Doodler, and have been looking for an excuse to try it out. Well, one broken 3D print off my Cocoon Create (who by the way have their own 3D Pen which was sold through Aldi for $79) and I finally had my chance! The benefit I see of such pens is the ability to repair and weld details on a regular 3D printed part – in this case a Voronoi Tealight Candle Holder available on Thingiverse. You can see the before and after photos above.
I have to admit the process wasn’t nearly as easy as I thought. The slowest speed of the pen is still quite fast, and once the plastic starts coming out of the nozzle you really need to get moving! The easiest repairs were the little ones near the bottom of the design, just a quick squirt and it was done. The larger distances were much more messy because of the speed of extrusion, but adhere well to the existing design especially if you use the nozzle to melt some of it to begin with and fuse the new material. I found that once I had roughed out the repair, I could use the hot nozzle to go back and “smooth” the outside surfaces like putty (although the result is far from smooth). This could be further improved with acetone (you can see some of my previous experiments cleaning surfaces with acetone here) but for an experiment like this, I’m happy to leave it as is.
The kit comes with both ABS and PLA filaments, with 2 temperature settings on the pen to match. However it would definitely be interesting to experiment with some different materials – I see on the 3Doodler website they also sell a Flexy Material in numerous colours. I wonder if you could put a conductive filament through to draw electronic circuits? Hmm that’s not a bad idea, perhaps there is more use to this pen than I first thought…
– Posted by James Novak