3D Printed Medal and Trophy

IMG_20181024 3D Printed Trophy Medal

As a product designer focused on 3D printing in my job at the University of Technology Sydney, it was no surprise that I found myself being asked to design some 3D printed awards for the end of year 2018 Vice-Chancellor’s Awards for Research Excellence. And while not receiving an award (yet!), I think it’s even more fun to get to be designing them – besides, now I can print them out for myself!

I was asked to design 2 different awards which you can see pictured above. The first were a set of 3 medals, and my only brief was to have them 3D printed in metal, and for them be approximately the size of previous medals given out for the awards. I based my design on a spinner concept which I’ve previously printed, with an important feature being the cone-like details which hold this assembly together when printed as a single part. There is no support material required, with one of my goals being to highlight through the design the capabilities of 3D printing in metal. For recipients, my goal was to create something playful and engaging, rather than most medals which are kept in a case and quickly forgotten. Thanks to my friend Olaf Diegel at Lund University for printing these in aluminium and sending them to us in time!

VID_20181023_095036 GIF

For those familiar with metal 3D printing (Direct Metal Laser Sintering to be specific), you can probably guess there was a lot of manual post-processing of these medals to remove the base supports and polish the surfaces. Below you can see the medal as it comes out of the printer on the left (once cut from the build plate), and the final polished version on the right. All of the base support material you can see in the raw version had to be filed away while held in a vice, before going through a lengthy process of polishing. Slow, painful work, but you haven’t truly 3D printed in metal until you’ve gone through this process, it makes peeling away plastic support material from FDM prints seem like child’s play!

cof

The second award was a trophy which also continued with the 3D printed assembly concept. My only brief for this design was for it to be printed on our own HP Multi Jet Fusion 3D printer, which is very similar to SLS printing. Many of us have seen the “ball in a ball in a ball” type of prints which are often shown at 3D printing expos and events, and I built off this to incorporate a lattice frame to contain the balls. The basic design was done in Solidworks, however, the balls were just solid spheres at this stage. I then exported them into Meshmixer in order to apply a lattice structure to them, using 2 different geometries. All parts were then imported into Meshmixer in order to export them as a final fully assembled file ready for printing.

VID_20181024_134222 GIF

A little bit of laser cutting and timber work by a colleague really helped bring the design to life, and again, the trophy encourages interaction and play. Congratulations to the winners and finalists, I hope you enjoy your awards as much as I did creating them. With any luck I might get to design them again in 2 years and bring one home myself for real! 😉

– Posted by James Novak

Advertisements

One thought on “3D Printed Medal and Trophy

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s