3D Printed Assemblies

20180420_3D Print Moving Assembly

One of the most interesting features of 3D printing is that it’s possible to print multiple parts in their assembled state, reducing the need to bring together a whole range of different pieces and assemble them using screws, snaps, glue etc. While this is normally easier using the Selective Laser Sintering (SLS) process, with a bit of experience and some clever design skills, it’s possible to 3D print moving assemblies on a basic desktop FDM machine.

Pictured above are 2 objects I’ve been wanting to 3D print for a long time as great examples of what can be done with an FDM machine. The first is called an Air Spinner and is free to download from Thingiverse. Due to the tolerances and angles between each part, no support material is needed, and you can literally start spinning each of the pieces straight off the printer, functioning like a gyroscope. A nice quick print, and a great demo piece. Below is a video I found of someone printing and spinning one so you can get the full effect.

The second print pictured to the right is a Planetary Gear Keychain, also free to download from Thingiverse. This one is much more of a test of your printer’s settings, the first time I printed it all of the pieces were completely fused together and impossible to free. Even this print required a knife to separate pieces that formed part of the first layer, with the squished plastic bonding them together as my nozzle was slightly too close to the print plate. This one is remixed from another design on Thingiverse which I recommend you check out for all the instructions to help get the best result, and read how other people achieved successful prints. Here’s a short video to see the planetary gears in action

If you’re looking for some fun prints to share with people, these 2 are very much recommended and relatively quick, although I’m still a very big fan of the Kobayashi fidget cube from one of my previous posts whichis another great assembled object. If you’ve got a favourite 3D printable assembly, leave me a comment/link below and I might add it to my list of things to make!

– Posted by James Novak

3D Printed Kobayashi Fidget Cube

20180115_Fidget Cube 3D

One of the great opportunities presented by 3D printing is to print multiple parts as a single object, and have them move afterwards as a complete assembly. There are many great examples, and this Kobayashi Fidget Cube has been on my “to-print list” for some time now. The file is freely available on Thingiverse, and it is pretty awesome!

The photos above give some idea of how it works; a series of cubes that are linked, allowing them to rotate around through a series of positions as you fold and open sections of the object. However the video below (not my own) shows exactly how it works, and is basically a form of fidget device that is currently a popular trend.

As well as being a fun object, it is a great test of your printer’s accuracy and settings, and I must admit my Cocoon Create only had average results. The cube works, but some of the movements are much stiffer than the video. This is probably to do with my settings, I was a little impatient in printing so did not optimise as much as necessary things like layer thickness (used 0.2mm and should’ve tried 0.1mm) and printing speed (50mm/s instead of perhaps 30mm/s or less). I also had to use a knife to slice some of the bottom layers where the cubes had fused together on the print plate. Not a bad first effort, but I might try printing again soon to get a really smooth operating fidget cube.

– Posted by James Novak