Often when you are 3D printing the main thing you think about is how much support material your print will have, and you orient your print to minimise this – reducing material waste, print time and any manual post-processing to clean up the print. However sometimes the best print orientation for these reasons is not the best for mechanical strength, and I’ve just discovered this with one of the parts for the InMoov robotic arm I’m currently building (see the first collection of 3D prints in my previous post).
The “RobServoBedV6” part is where the 5 servo’s connect that control the individual finger movements, using screws to fix them in place. However some of the stands are splitting as I screw into them as shown in the photo above due to the layer orientation. Yes I could use super glue to fix them, but the split will just happen somewhere else. So I’m going to completely cut the stands away from the part, and re-print just these stands in a different orientation to improve their strength. This is where the free program Meshmixer comes in very handy, and I’ve previously published a few examples of how to use it for my friends at Pinshape – just click here to find out more.
In the top right image you can see the first step of using Meshmixer to edit the STL file. I have used the Plane Cut tool to slice away the bottom plate, and then repeat the process to remove the other 2 segments which seem to be strong enough for the screws at the moment. This leaves me with the 2 stands that I’m having issues with. These can now be exported as STL’s ready to 3D print (orientation is not important here, this will be set in my 3D print software).
I’m printing these parts as we speak on my Cocoon Create 3D printer, and have used Cura to prepare the parts and get the G-code. As you can see to the left, I have oriented the parts so that the layers are perpendicular to the original orientation, meaning that when I screw into them, the force from the screw will not pull the layers apart. Super glue will hold these replacements onto the original part really well as they are printed in ABS.
If you are designing your own parts from scratch in CAD and intend to screw directly into them, keep this issue in mind. However if you’re downloading a STL where modification isn’t as easy, knowing this simple trick in Meshmixer can really help you repair and improve a part rather than trying to re-print it from scratch and potentially use a lot of support material in a different orientation.
– Posted by James Novak